Menu

Fixed Gas Detection

P5432.23.ABA

TX6363 IR Head, CH4 0-5% v/v, ATEX GrpI


P5432.69.253.11.00

TX6363 IR Head, CH4 0-5% v/v, ATEX GrpI


P9000.260 Sentro 1 With AV Alarm

Safety monitoring of toxic and flammable gases, in heavy-duty applications with fully integrated audio visual alarm for wide area working. Features: High accuracy gas detector with calibrated input sensing modules to detect a range of toxic and flammable gases. Integrated high intensity, all-round, audio/visual alarm for wide area working, with periodic flashing confidence alert. Standard 4 to...


TX6351 / TX6352 Sentro 1 Gas Detector

Trolex Sentro 1 is the world's foremost fixed gas detector for hazardous location gas detection. At the heart of Sentro 1 is the eModule; intelligent standardised gas sensing modules to cover a range of toxic and flammable gases. Dynamic and historic data is stored within each module together with the condition of the gas sensing element and its service history. Service and calibration, or...


TX6352.01i.12.35.19

Sentro 1 Base Unit , 4-20mA Loop, ATEX/IECEx/UKEX GrpI


TX6352.01i.MT

Sentro 1 Base Unit , 4-20mA, TX6352.01i.12.19, ATEX/IECEx Grpl


TX6363 Infra Red Gas Detector

The Trolex TX6363 infra red flammable gas detector delivers long-term stability with minimal signal drift utilising infrared detection cells. The units respond to specific gasses and feature ambient pressure and temperature compensation. The response of the sensor is linear across the complete sensing range making it equally suitable for operation in the LEL range and the high-concentration...


TX6363.BMEBB

TX6363 IR, 4-20mA, CO2 5%v/v, c/w SNS, ATEX GrpI


TX6373 Toxic Gas Detector

Fixed gas detection for point source hazards and perimeter protection in arduous duty and exposed locations. High accuracy electrochemical gas sensing elements. Suitable for use in SIL 1 and SIL 2 applications, in accordance with any conditions or restrictions. For a copy of the Functional Safety assesment report contact: sales@tridentaustralia.com.au Available with a choice of analogue output...


TX6383 Flammable Gas Detector

Fixed gas detection for point source hazards and perimeter protection in arduous duty and exposed locations. Suitable for use in SIL 1 and SIL 2 applications, in accordance with any conditions or restrictions. For a copy of the Functional Safety assesment report contact: sales@tridentaustralia.com.au Poison resistant catalytic combustion sensors. Available with a choice of analogue output...


TX6400 Sentrum Monitoring System

The Trolex TX6400 Sentrum Monitoring System is designed to provide the complete solution for Methane Recovery Monitoring applications. Using proven technology, the TX6400 was developed to measure methane at source and at strategic points throughout the methane pipe network. Complex algorithms are used to correct for the effects of non-methane hydrocarbon cross sensitivity, together with mass...


TX9165 Sentro 8 SensorStation

This integrated, multi-use multi-gas SensorStation - with intelligent, interchangeable sensing modules - brings together an array of accredited hazardous-area technologies. These are served by universal data communications architecture, making it straightforward to network SensorStations to a master computer and expand the system if required at a later date. Features: Large LCD Readout. Extra...


TX9165.01.i.TBB

Sentro8 Sensor Station ATEX/IECEx GrpI TX9165.01.i.19.01.01 1 Port-English


TX9165.01.i.TBB SYSTEM

System Comprising of: Sentro8 Sensor Station ATEX/IECEx GrpI TX9165.01.i.19.01.01 1 Port-English c/w mounting frame, AV alarm/battery back up and Moxa TCP/IP converter


TX9165.01.i.TGB

Sentro8 Sensor Station ATEX/IECEx GrpI TX9165.01.i.19.06.01 6 Ports-English


TX9165.03.102

Sentro8 Sensor Station GP 24Vdc Supply TX9165.03.102 Number of gas modules: (Specify)


TX9165.03.102 ETH

Sentro8 Sensor Station GP 24Vdc Supply TX9165.03.102 Mounted on Steel Frame c/w battery back up, AV alarm and Moxa TCP/IP convertor (ethernet Fibre). Unit pre wired and tested


TX9503.03

SCADA HMI 600 c/w PC This would take approx. 8 units (10 units gas/ 7 units gas and dust)


TX9503.04

SCADA HMI 600 c/w PC This would take approx. 16 units (20 units gas/ 14 units gas and dust)