Menu

Liquid

4 Inch Wing Nut Series for Liquid Service

Hoffer 4 Inch WECO 1502 turbine flow meter with the full flow capacity of a conventional 4 inch flowmeter. Other 4 inch WECO 1502 turbine meter designs have been limited in flow range to a few hundred GPM. The Hoffer design has a flow capacity of 75 to 1250 GPM standard and 50 to 1500 GPM over an extended range. 15,000 psi for conventional service and 10,000 psi for sour gas (H2S) service.


API Series Turbine Flowmeters for Custody Transfer

The Hoffer API Series turbine flowmeters provide extremely accurate custody transfer grade flow measurement in a bladed rotor design. These flowmeters are typically used to measure liquid petroleum products.


CT Series Turbine Flowmeters for Custody Transfer

The Hoffer CT Series turbine flowmeters provide extremely accurate custody transfer grade flow measurement in a rim rotor design. These are typically used in liquid petroleum products and this series is recommended for flow applications where high resolution (pulse count) is critical in order to achieve custody transfer grade accuracy.


Grooved Turbine Flowmeters

Hoffer Grooved Turbine Flowmeters for Oil Patch flow applications which include Water, Water/ Sand, Liquid Carbon Dioxide, and Cement Slurry


HO Series Wafer for Liquid Service

Hoffer HO Series Wafer is a cost efective design that elimates flanges on the meter. They have outstanding accuracy and are rated to meet the pressure rating of any flange as listed in ASME B 16.5. These provide a wide range of flows with 10:1 turndown typical.


Wing Nut Series for Liquid Service

Hoffer High Pressure (15,000 PSI) Wing Nut Series flowmeter for water, liquid carbon dioxide, cement and slurry Oil Patch and Industrial for Water, Water/Sand and Liquid Carbon Dioxide