Exciting News from Trident Australia!
Our Engineering Team has successfully built and designed three Chemical Injection Units as part of the 'Corrosion Inhibitor Package' for an Expansion Project for a valued client here in Australia!
Key Features of the Trident Australia 1801 Series Chemical Injection Unit:
- Frame and Storage: Powder-coated steel frame with a bottom drip tray and a 45L storage tank.
- Pump Assembly: Checkpoint ATP3 Electric Pump with a 12VDC motor, manual control, and C1D2 certification suitable for Zone 1. Features include a 316SS head with solid ceramic plunger and FKM seals.
- Valves: Various Parker valves including Hi-Pro ball valves, V Series needle valves, C Series poppet check valve, LC Series lift check valve, block and bleed valves, and RH4 pressure relief valves.
- Pressure Transducer: IS-3 Standard, 0-5,000 psi, 0.5% FSA, 4-20mA, Zone Rated.
- Flow Switch: Meister RVM/U-4 with a flow rate of 5-60ml/min, Zone Rated.
- Calibration Gauge: 50 ml/min assembly with 316SS, glass, and PVC components.
- Starter Panel: Local starter panel for the 12VDC motor, assembled in an ATEX/IECEX certified enclosure.
- Instrumentation Fittings: Swagelok.
- Enclosure: IP67 rated around the pump and motor assembly.
- Level Switch: VEGACAP 64 capacitive rod probe, 4-20mA, Zone 2 rated.
- Hydraulic Tank Accessories: PARKER 934330T desiccant breather and a drain valve.
We are thrilled to contribute to this Expansion Project and proud of our engineering team's innovation and dedication.
If you need anything manufactured, we would love to hear from you and you can discuss your needs with our experienced team.
Contact us at sales@tridentaustralia.com.au
