Hughes Pumps HPS1000 DC diesel engine driven unit.
Specifications:
- Model - HPS1000 (with 431 stainless steel pump head)
- Performance - 28 l/min at 20000 psi (flowrates indicated are swept volume & will reduce with pressure)
- Plunger diameter (mm) - 20
- Input speed (rpm) - 2000
- Gear ratio - 4.00
- Pump speed (rpm) - 500
- Power, absorbed / rated (kW) - 72/75
- Pumped Fluid - Clean, cold water, maximum 40°C
Controls:
- Overpressure protection - Safety valve set at 15-20% above working pressure
- Pressure readout - Pressure transducer and digital display
- Control valve / controls - None
Water supply:
- Boost pump: Yes, 3-4 bar supply (nominal)
- Primary filtration: Inlet Strainer
- Secondary filtration: Stainless steel filter housing with 25 micron element
- Water tank: Yes, stainless steel, complete with inlet float valve and level
- Pipework: 10 bar rated rubber hose, stainless steel fittings
Diesel Engine:
- Manufacturer/model - Perkins / 1104D-E44TA
- Cylinders: 4
- Emissions Rating: Tier 3
- Power at specified speed (kW): 87.2
- Start/charge system:12v (battery assembly included)
- Fuel tank capacity: Sufficient for approximately 8 hours operation, with fuel level gauge
- Air compressor - Available as a build option if required
Control Panel:
- Type: Steel enclosure
- Digital display/shutdown of engine and pump functions
- Emergency Stop
Chassis:
- Type - Open crashframe
- Four overhead lifting points
- Two forklift pockets
- Powder coated
Trailer - Not Included