Liquid Pumps


Please roll over links for full product catalog



Note: images of products are not to scale.

L3 and L3C Series Liquid Pumps

Compact air operated liquid pumps. Wetted sections available in 316L Stainless Steel (L3) and Carbon Steel (L3C). Seven ratios available in each material, capable of pressure exceeding 18,000 psig.

Compact pumps are used commonly for jacks, punches, clamping, holding, bolt tensioning, presses, torque wrenches, valve actuation and pressure testing. These pumps are suited for use with de-ionized water, NOS and CO2 applications. Several modifications available including Hand pump attachment and remote pilot options.

Click here for Technical Data

L3 and L3C Series Liquid Pumps

10-4 Series Liquid Pumps

Smallest of the SC “Standard” type pumps with a 4″ diameter air cylinder and 1 1/4″ stroke. Nine ratios available with the highest ratio capable of hydraulic pressures up to 22,000 psig. Commonly used where fluid flow is not critical. Typical applications include proof and burst testing, clamping, pressing, jacks and any end use requiring very high pressure at low flows.

Click here for Technical Data

10-4 Series Liquid Pumps

10-5 Series Liquid Pumps

D-5 Series Non Lubricated Liquid PumpsThe original and most common SC “standard” series pump with a 5 1/4″ diameter air cylinder and 1 1/4″ stroke. 16 ratios available with the highest ratio capable of hydraulic pressures up to 55,000 psig. Commonly used for bolt tensioning, filter presses, clamping, proof and burst testing, metal forming. The 10-5 series with it’s many ratios and modification options can be utilized anywhere a source of hydraulic pressure is required. The D-5 series has all the same characteristic including a Non Lubricated feature.

Click here for Technical Data

10_5series

10-6 Series Liquid Pumps

D-6 Series Non Lubricated Liquid PumpsThe largest of the SC “standard” series pumps with a 7″ diameter air cylinder and a 2 1/2″ stroke. 13 ratios available with the highest ratio capable of hydraulic pressures up to 73,000 psig. Commonly used where very high pressures are required at low flows. Applications include proof and burst testing to extreme high pressures, torque wrench actuation, bolt tensioning, aircraft jacks, filter presses, clamping, holding, metal forming. 10-6 is used extensively by offshore oil companies in many applications due to the pumps inherent ruggedness and reliability. The D-6 has the same characteristics including a Non Lubricated feature.

Click here for Technical Data

10_6series

L10 Series Double Acting Liquid Pumps

The largest liquid pump currently manufactured by SC with a 10″ diameter air cylinder, this double acting pump is available in 4 ratios, the highest of which is capable of hydraulic pressures up to 20,000 psig.

Created primarily for the offshore rental tool market, the L10 series pumps are commonly used for subsea valve actuation, wireline control systems, blow out preventor controls and flushing rigs. L10 pumps can be applied anywhere there is a requirement for very high hydraulic pressures along with higher flows achieved by the 10-6 series.

Click here for Technical Data

L10series