Haskel 10 HP Liquid Pumps
- Choice of 4 models, 4 ratios, 4 possible combinations
- Pressures to 36000 psi (2500 bar)
- Flow rates to 3 gpm (11 l/min)
- Drive pressure 3 to 125 psi (.2 to 9 bar)
- All hydraulic fluids, water (plain or DI), solvents, liquefied gases
- Choice of wetted materials
AHL Series High Flow, High Pressure Liquid Pumps
AHL Series High Flow, High Pressure Liquid Pumps are used when you need big flows at pressure.
AHL pumps are high flow capacity pumps designed for pressure testing, chemical injection, and hydraulic power. They feature infinitely variable pressure and flow outputs while holding static pressure indefinitely without generating heat or consuming any power. Suitable for use with oil or water, these pumps are well proven and are designed for trouble free operation. Our pumps are built to include most competitive options and require only the basic of choices be made. Autoclave pumps are designed to work, and work well.
Autoclave Engineers AHL Series High Flow, High Pressure Liquid Pumps in the Trident 701 Series
We have used a lot of the AHL series pumps in our larger test systems including several fixed installations. You are most likely to see one in our rental 701 Series.
This series is available in pressures to 22,500 psi. Please contact us for appropriate data sheets and information.
Pumps and Power Units
Autoclave Engineers provide low, medium and high pressure (up to 150,000 psi). Air driven liquid pumps, stainless steel tubing and fittings, check valves, needle, ball and relief valves and actuators. Speedbite range available. Up to 15,000 psi with no coning or threading required!
BIS Valves have a range of radial/piston pumps – 260 PR and 520 PR series, mild steel high pressure radial piston pumps for pressures up to 12,000 psi.
Haskel Milton Roy manufacturers of pneumatically driven, high pressure liquid pumps, gas boosters, air pressure amplifiers and high pressure systems.
SC Hydraulic liquid pumps, air and gas boosters, power units and systems, high pressure valves and components.
Enerpac pumps part of the lifting, pushing, pulling, bending, spreading, cutting, lowering, pressing, punching… that is the real world of Enerpac. Providing the professionals with hydraulic tools to work with and be profitable.
10-4 Series Liquid Pumps
The 10-4 Series Liquid Pumps are the smallest of the SC “Standard” type pumps with a 4″ diameter air cylinder and 1 1/4″ stroke. Nine ratios available with the highest ratio capable of hydraulic pressures up to 22,000 psig. Commonly used where fluid flow is not critical. Typical applications include proof and burst testing, clamping, pressing, jacks and any end use requiring very high pressure at low flows.
ACHL Compact 3 inch Hand Lever, Air-Driven, High Pressure Liquid Pump
ACHL Compact Hand Lever, High Pressure Liquid Pump. We use one of these in our own relief valve test bench.
Parker Autoclave Engineers has designed a compact (miniature) high pressure liquid pump that delivers high pressure hydraulic power in a mobile, easy to use package that includes a hand lever. Pneumatic or hand lever driven, this non-sparking or heat generating pump is considered explosion-proof and safe for use in hazardous areas. Our pumps are designed to include most competitive options and require only the basic of choices be made. Autoclave pumps are designed to work, and work well.
ACHL Compact Hand Lever, High Pressure Liquid Pump in a System
We have used this pump in our own relief valve test bench. We can take the pump up to a pressure close to our test pressure then minutely adjust it to the set pressure.
This series is available in pressures to 31,900 psi. Please contact us for appropriate data sheets and information.
L10 Series Double Acting Liquid Pumps
The L10 Series Double Acting Liquid Pump is the largest liquid pump currently manufactured by SC with a 10″ diameter air cylinder, this double acting liquid pump is available in 4 ratios, the highest of which is capable of hydraulic pressures up to 20,000 psig.
Created primarily for the offshore rental tool market, the L10 series pumps are commonly used for subsea valve actuation, wireline control systems, blow out preventor controls and flushing rigs. L10 pumps can be applied anywhere there is a requirement for very high hydraulic pressures along with higher flows achieved by the 10-6 series.
L10 Series Double Acting Liquid Pump in a system
The L10 is a big pump! We have used them several times in custom systems needing large flows. Have a look at our Manufacturing page to see our capabilities or go to the Systems tab of the Products for standard systems.
BP-Series Battery Powered Hydraulic Pumps
These battery powered hydraulic pumps have a lightweight, compact design with an integrated handle for maximum portability. They come with dual power selection and variable speed for preferred flow and precise control. The pumps include a manual 3/2 valve (advance/retract) for use with single-acting cylinders and tools and a heavy-duty 28 volt Lithium-Ion battery pack delivers constant fade-free power. You can immediately charge the pumps after use-a quick one hour charge. The pump model includes two 3,0 Ampères-hour battery packs and quick charger.
Series AFL Double Acting, Single Ended, High Flow Liquid Pump
Series AFL Double Acting, Single Ended, High Flow Liquid Pump
Parker Autoclave Engineers has designed a compact (miniature) high pressure liquid pump that delivers high pressure hydraulic power in a mobile, easy to use package. At only 8 ½” tall the pumps easy-to-understand features permit our customers to spend their time thinking about how to use the pump, not where they are going to place it… Our pumps are designed to include the most competitive options and require only the basic of choices be made. Autoclave pumps are designed to work, and work well.
Series AFL Double Acting, Single Ended, High Flow Liquid Pump in a Trident Series Test System.
We haven’t built this in to a system yet but it would go very nicely in to a Trident 101 Series. We keep the frames and tanks in stock so it would only take a short time to get a unit together for you.
This series is available in 3 different models with outlet pressures to 15,000 psi. Call us today for data sheets or to look at putting one of these pumps in to your fleet.
10-6 Series Liquid Pumps
The 10-6 Series Liquid Pumps or D-6 Series Non Lubricated Liquid PumpsThe largest of the SC “standard” series pumps with a 7″ diameter air cylinder and a 2 1/2″ stroke. 13 ratios available with the highest ratio capable of hydraulic pressures up to 73,000 psig. Commonly used where very high pressures are required at low flows. Applications include proof and burst testing to extreme high pressures, torque wrench actuation, bolt tensioning, aircraft jacks, filter presses, clamping, holding, metal forming. 10-6 is used extensively by offshore oil companies in many applications due to the pumps inherent ruggedness and reliability. The D-6 has the same characteristics including a Non Lubricated feature.
10-6 Series Liquid Pumps installed in a Pressure Test Unit
We would put this series of pump in to the Trident 101 Series frame and it would make a very economical high flow Pressure Test Unit.
P-Series, Low Pressure Hand Pumps
These Low Pressure Hand Pumps contain an external load-release valve as well as an internal pressure-relief valve for overload protection.
The P-51 can be operated in horizontal and vertical position with pump head and oil outlet facing downwards
The P-25 and P-50 pump oil in both forward and reverse handle movement improving overall efficiency, ideal when mounting space is restricted.
Autoclave Engineers Packaged Pressure Pump Systems
Autoclave Engineers Packaged Pressure Pump Systems.
While we build our own systems at Trident Australia we have bought the systems manufactured by Autoclave Engineers and have several of the AHL Series Systems in our rental fleet.
Using the knowledge developed over the last 65 years, Parker Autoclave Engineers Packaged Pressure Systems have been developed to incorporate any of our Air-Driven, High Pressure Liquid pumps, valves and fittings into a wide range of self-contained portable, or custom framed modules that “plug and play” for virtually any test, control, or injection system you can imagine. They vary in size, flow capability, output pressure and can include optional features such as chart recording, data logging, cycle counters, injection controllers and almost any kind of electric or pneumatic valve control option.
Applications include: Hydrostatic/Burst/Leak/Functional testing, Chemical injection, Valve/Hose/Gauge testing, Bolt tensioning, Hydraulic Control systems, Laboratory Research and Autofrettage systems.
Have a look at our range of systems or contact us for a copy of the Autoclave Engineers Packaged Pressure Pump Systems brochure.
10-5 Series Liquid Pumps
The 10-5 Series Liquid Pump and D-5 Series Non Lubricated Liquid Pumps, the original and most common SC “standard” series pump with a 5 1/4″ diameter air cylinder and 1 1/4″ stroke. 16 ratios available with the highest ratio capable of hydraulic pressures up to 55,000 psig. Commonly used for bolt tensioning, filter presses, clamping, proof and burst testing, metal forming. The 10-5 series with it’s many ratios and modification options can be utilized anywhere a source of hydraulic pressure is required. The D-5 series has all the same characteristic including a Non Lubricated feature.
10-5 Series Liquid Pump built in to a Pressure Test Unit
The 10-5 or D-5 from SC Hydraulic is the most popular pump we sell in the Trident 101 Series Pressure Test Unit