icon-product

Trident Australia


101 Series

101-series-d5

The 101 Series is Tridents most basic and versatile test unit style.  We hold these in stock with SC Hydraulic 10-500 (D5) Series air driven pumps to 30,000 psi.

101 Series for Purchase or For rent

These systems are available for purchase or for rent.  For any enquiries to purchase please contact sales@tridentaustralia.com.au, or for rentals please contact rentals@tridentaustralia.com.au.  For any further information please give us a call.

Back to top


3401 Series – Low Pressure Valve Manifold

3401-series-low-pressure-valve-manifold

This  Low Pressure Valve Manifold is one of a number of manifolds we have made lately. Most commonly used for distributing low pressure air we have also made these for low pressure gas. This manifold has been made using 316SS pipe and low pressure ball valves. It was manufactured in house by our welders and pressure tested for safety.

Its a great feeling to be manufacturing these in Western Australia!

Ball Valves stocked at Trident Australia

Most of the valves we sell are higher pressures but we use a lot of low pressure valves ourselves in systems. Have a look at our standard ranges of ball valves here but remember we do have plenty of low pressure options too!

 

Low Pressure Valve Manifold for Rent

Theses manifolds are available for purchase or for rent.  For any enquiries to purchase please contact sales@tridentaustralia.com.au, or for rentals please contact rentals@tridentaustralia.com.au.  For any further information please give us a call.

 

 

Back to top


1901 Series

Hose Test Unit

Tridents 1901 series hose test unit is perfect for hose testing in your workshop or could even be fitted to a vehicle.  It has a full enclosed test cell to protect the operator from injury in the event of a hose failure.  Better that the hose fails here than out in the field!

 

These systems are available for purchase or for rent.  For any enquiries to purchase please contact sales@tridentaustralia.com.au, or for rentals please contact rentals@tridentaustralia.com.au.  For any further information please give us a call.

Back to top


601 Series – Electric Pump and Accumulator

601-series-electric-pump-and-accumulator

The 601 Series fitted with an Electric Pump and Accumulator. It is not often that we are building smaller pump units with electric pumps but in this case the customer was looking for a high flow. The accumulator helps here in storing pressure so it is there at the flow when needed.

Accumulators

Our enquiries for accumulator’s are many and varied. We use three manufacturers regularly to support our customers with their unique requirement’s. We also hold a large stock as so many of our enquiries need to be Ex Stock. Have a look at some of our range of accumulators here.

For Purchase or Hire

These systems are available for purchase or for rent.  For any enquiries to purchase please contact sales@tridentaustralia.com.au, or for rentals please contact rentals@tridentaustralia.com.au.  For any further information please give us a call.

Have a look at some of our rental systems here

 

Back to top


1201 Series with dual HP filters

1201 Series - Dual HP Filters

This Trident 1201 series unit was built for a customer here in Western Australia. It is used for flushing a water glycol system.

Pall Filters

This system has been built with twin Pall HH903 5,000 psi stainless filters, HC90 5 micron filter element and 7 bar pop out indicator manual reset. The end connections are JIC 8 male.

Have a look at the Pall Filter range here

For Sale or Rent

These systems are available for purchase or for rent.  For any enquiries to purchase please contact sales@tridentaustralia.com.au, or for rentals please contact rentals@tridentaustralia.com.au.  For any further information please give us a call.

Back to top


101 Series – Hand Pump Version

101-series-ms-hand-pump

This version of our 101 series is fitted with a Haskel M or MS or SC Hydraulic L3 or L3C Series air driven pump with a hand pump attachment.  Perfect for small volume testing with the adjustment of pressure with the hand pump.

Hand Pump from Haskel or SC Hydraulic

We often build these for customers and the MS series from Haskel or the L3 series from SC Hydraulic are both held in stock. Check them out here.

For Purchase or Rental

These systems are available for purchase or for rent.  For any enquiries to purchase please contact sales@tridentaustralia.com.au, or for rentals please contact rentals@tridentaustralia.com.au.  For any further information please give us a call.

Back to top


3401 Series – Low Pressure Camlok Manifold

3401-series-camlok-manifold

This Low Pressure Camlok Manifold is a little different. The customer specified for it to be manufactured with twin ferrule tube fittings so we used 1 inch Duolok fittings from stock. The Camloks are also manufactured from 316SS so this manifold will last forever!

Duolok Twin Ferrule Fittings stocked at Trident Australia

We use a lot of Duolok tube fittings and have done for the past 18 years. They are an extremely reliable fitting and a cost effective alternative to the popular Swagelok fitting. Have a look at our  range here and give us a call for your next project.

Low Pressure Valve Manifold for Rent

These manifolds are available for purchase or for rent.  For any enquiries to purchase please contact sales@tridentaustralia.com.au, or for rentals please contact rentals@tridentaustralia.com.au.  For any further information please give us a call.

 

Back to top


2101 Series

2101 series pressure test bay unit

Tridents 2101 series pressure test bay is built for safety! Built inside a custom built container it has lined walls rated for a 30,000 psi failure.  The control system is outside the unit and sees no direct high pressure while the pressure unit is located inside the unit.  Can be built in any size container for a portable test bay or as a fixed bay for your facility.

 

These systems are available for purchase or for rent.  For any enquiries to purchase please contact sales@tridentaustralia.com.au, or for rentals please contact rentals@tridentaustralia.com.au.  For any further information please give us a call.

Back to top


301 Series – With Dual Haskel Pumps and Tank

301-series-dual-haskel-pumps

Dual Haskel Pumps in the Trident 301 series gives a fast and efficient test. The first pump is a Haskel ASF-60 that can take the pressure to 6000 psi  while the high pressure pump is a Haskel HSF-225 that can take the pressure to 22,500 psi. Without the ASF-60 to get the fluid to a reasonable pressure first the test would take so much longer to achieve 22,500 psi as the HSF-225 has such a small volume per stroke.

This unit also has a larger 30 litre tank.

Dual Haskel Pumps

The 301 Series is most commonly used for Haskel pumps and specifically the 1.5HP shown here.

Purchase or Rent this unit

These systems are available for purchase or for rent.  For any enquiries to purchase please contact sales@tridentaustralia.com.au, or for rentals please contact rentals@tridentaustralia.com.au.  For any further information please give us a call.

Back to top


1201 Series with single LP filter

1201 Series Single Low Pressure Filter

This Trident 1201 series unit was built with a low pressure filter for one of our good offshore customers.

Pall Low Pressure Filter

This system has been built with a single low pressure Pall LMO 316SS and a 10 micron polypropylene cartridge.

Have a look at the Pall Filter range here

For Sale or Rent

These systems are available for purchase or for rent.  For any enquiries to purchase please contact sales@tridentaustralia.com.au, or for rentals please contact rentals@tridentaustralia.com.au.  For any further information please give us a call.

Back to top


201 Series

201 gas booster

Trident 201 Series built for gas booster like the Haskel AGT-30/75 or SC Hydraulic GBT-30/75.   Full protection from the boosters and high pressure fittings provided by the front mimic panel and solid front blow out back gauges.

 

These systems are available for purchase or for rent.  For any enquiries to purchase please contact sales@tridentaustralia.com.au, or for rentals please contact rentals@tridentaustralia.com.au.  For any further information please give us a call.

Back to top


101 Series – Adjustable Relief Valve version

101-series-adjustable-relief-valve-version

The Adjustable Relief Valve version of our popular Trident 101 series has come up regularly as a requirement lately. We just built this unit using the Haskel Adjustable Relief Valve part number: 27741.

Haskel Adjustable Relief Valve

The Haskel 27741 valve is one that we like to use. It has two inlet ports on opposite sides of the body with the outlet port on the bottom so it is very flexible to install. This is the only relief valve we know of that can be used inline to reduce pressure. One cannot get a relief valve to reseat under this application which proves how good it is.

There is some general information about these relief valves here but if you need more please let us know.

Purchase or Rent

These systems are available for purchase or for rent.  For any enquiries to purchase please contact sales@tridentaustralia.com.au, or for rentals please contact rentals@tridentaustralia.com.au.  For any further information please give us a call.

Back to top