icon-product

BIS Valves


(ILL CMYK) BISValves

BIS Valves leaders in directional control valves, safety and relief valves, excess flow and check valves, pressure sensing metering and solenoid valves.

A4 Series Diaphragm Air Actuator

A4 series diaphragm air actuator
  • Pilot Port Size : 1/8’’
  • Thread Form: (Pilot Supply) BSP (Parallel)
  • Maximum Pilot Pressure : * 150 psi
  • Diaphragm Material: Nitrile (with Nylon fabric reinforcement)
  • Dry Weight: (kg) 1.3
  • Working Temperature Range -10°C to +100°C382666[1]

  Download PDF

Back to top


A3 Series Diaphragm Air Actuator

A3 series diaphragm air acuator
  • Pilot Port Size : 1/8’’
  • Thread Form: (Pilot Supply) BSP (Parallel)
  • Maximum Pilot Pressure : * 150 psi
  • Diaphragm Material: Nitrile (with Nylon fabric reinforcement)
  • Dry Weight: (kg) 1.3
  • Working Temperature Range -10°C to +100°C382666[1]

  Download PDF

Back to top


A1 Series Diaphragm Air Actuator

A1 series diaphragm air actuator
  • Pilot Port Size : ¼’’
  • Thread Form: (Pilot Supply) BSP (Parallel)
  • Maximum Pilot Pressure : * 150 psi
  • Diaphragm Material: Neoprene
  • Dry Weight: (kg) 1.3
  • Working Temperature Range -10°C to +100°C382666[1]

  Download PDF

Back to top


A2 Series Diaphragm Air Actuator

A2 series diaphragm air actuator
  • Pilot Port Size : ¼’’
  • Thread Form: (Pilot Supply) NPT (Tapered)
  • Maximum Pilot Pressure : * 150 psi
  • Diaphragm Material: Nitrile (with Nylon fabric reinforcement)
  • Dry Weight: (kg) 0.5
  • Working Tepmperature Range -10°C to +100°C382666[1]

  Download PDF

Back to top


KC Series Solenoid Thruster

kc series solenoid thruster
  • Voltage Rating: 24 V D.C.
  • Power Rating: 15.5 Watts
  • Dry Weight: (kg) 1.0
  • Working Temperature Range: -10°C to +60°C (Ambient)

 

  Download PDF

Back to top


HC Series Solenoid Thruster

HC series solenoid thruster
  • Voltage Rating: 24 V D.C.
  • Power Rating: 15.5 Watts
  • Dry Weight: (kg) 1.0
  • Working Temperature Range: -10°C to +60°C (Ambient)

  Download PDF

Back to top


SW Series Solenoid Thruster

sw series solenoid thruster
 
  • Voltage Rating: 24 V D.C.
  • Power Rating: 15.5 Watts MAX
  • Dry Weight: (kg) 1.0
  • Temperature Rating: -10°C to +60°C Ambients

  Download PDF

Back to top


STEX1 Series Solenoid Thruster

STEX1 series solenoid thruster
  • Conduit Connection: A – Radial Exit
    B – Axial Exit
  • Voltage Rating: 24 V
  • Power Rating: 15.8 Watts MAX
  • IP Rating: IP 66
  • Dry Weight: (kg) 2.8
  • Temperature Rating T5 @ -10°C to +40°C Ambients, T4 @ -10°C to +60°C Ambients

 

  Download PDF

Back to top


F Series Inline Filters

inline filters

BiS Valves offer a wide range of filtration products, ranging from small component protection filters or strainers to full pressure main line filter units. Available with a wide range of mesh ratings, our F series inline filters can provide vital protection for contaminant sensitive downstream components, and are particularly designed to protect against rogue pieces of debris that have passed the main line filtration or were built into the system during manufacture.382666[1]

  Download PDF

Back to top


Check Valve NR25, NR37, NR50, NR75, NR100, NR200

Check Valve N Type
  • Stainless steel (316 / 1.4404)
  • Suitable for liquid or gas use
  • Male threaded porting / connections are available on request
  • All dimensions in inches382666[1]

  Download PDF

Back to top


Check Valve C25, C37, C50, C100, C125, C150

Check Valve C Type
  • Stainless steel (316 / 1.4404)
  • Suitable for liquid or gas use
  • All dimensions in inches382666[1]

  Download PDF

Back to top


Cartridge Check Valve CC25, CC37, CC50, CC75

Cartridge Check Valve
  • Stainless steel (316 / 1.440)
  • Suitable for liquid or gas use
  • Pocket drilling details available upon request
  • All dimensions in inches

  Download PDF

Back to top


Directional Control Valve 3B37

Directional Control Valve 3B37

 

  • 2 Position / 3 ported mild steel – ENP (EN1A /220M07) valve with actuator options
  • Body material options: stainless steel (316 / 1.4404), aluminium. alloy (HE30)
  • Suitable for liquid use
  • Fitted with “hard seats”
  • All dimensions in inches382666[1]

  Download PDF

Back to top


Directional Control Valve 3B50

Directional Control Valve 3B50

 

  • 2 Position stainless steel (316) valve with actuator options
  • Suitable for liquid use
  • Fitted with “hard seats”
  • All dimensions in inches382666[1]

  Download PDF

Back to top


Directional Control Valve 6B37-A3

Directional Control Valve 6B37-A3
  • 2 Position / 4 ported mild steel – ENP (EN1A / 220M07) valve with actuator type “A3” fitted
  • Body material option: stainless steel (316/1.4404)
  • Suitable for liquid use
  • Fitted with “hard seats”
  • All dimensions in inches382666[1]

 

  Download PDF

Back to top


Rotary Control Valve 4R25

Rotary Control Valve 4R25
  • 4 Ported lever operated stainless steel (316/1.4404) valve (some carbon steel internal parts)
  • Body material option: mild steel – ENP (EN1A / 220M07)
  • Suitable for liquid use
  • Specify “flow pattern type” when ordering
  • All “flow diagrams” are viewed on arrow “A”
  • All dimensions in inches382666[1]

  Download PDF

Back to top


Rotary Control Valve 4R37

Rotary Contol Valve 4R37
  • 4 Ported lever operated stainless steel (316 / 1.4404) valve (some carbon steel internal parts)
  • Suitable for liquid use
  • Specify “flow pattern type” when ordering
  • All “flow diagrams” are viewed on arrow “A”
  • All dimensions in inches382666[1]

  Download PDF

Back to top


Excess Flow Valve ER25, ER37

Excess Flow Valve ER25 ER37
  • Stainless steel (316 / 1.4404)
  • Suitable for liquid or gas use
  • All dimensions in inches382666[1]

  Download PDF

Back to top


Excess Flow Valve R25, R37, R50, R75, R100, R150

Excess Flow Valve
  • Stainless steel (316 / 1.4404)
  • Suitable for liquid or gas use
  • All dimensions in inches382666[1]

  Download PDF

Back to top


Pilot Operated Check Valve MS75, MS75/50

Pilot Operated Check Valve MS75
  • 2 Position / 2 ported stainless steel (316 / 1.4404) valve with actuator options
  • Suitable for liquid use
  • All dimensions in inches

  Download PDF

Back to top


Safety Relief Valve (L.P) S25, S37, S50, S75, S100

Safety Relief Valve S Type
  • Pressure equipment directive (PED) 97/23/EC approved
  • Stainless steel (316 / 1.4404)
  • Material option: Brass
  • Suitable for liquid or gas use
  • Venting to atmosphere
  • All dimensions in inches
  • It is NOT recommended to operate this valve below 10 psi (0.7 bar)
  • Stated pressure is maximum setting.  Lower settings are available by using a range of different springs.  Please confirm when ordering
  • Leaktight when 90% of “set pressure” is applied
  • Re-seating within 7.5% of “cracking pressure” (pre-set cracking pressure is optional) state details when ordering382666[1]

  Download PDF

Back to top


Safety Relief Valve (L.P) TS25, TS37, TS50, TS100

Safety Relief Valve T Type
  • Pressure equipment directive (PED) 97/23/EC approved
  • Stainless steel (316 / 1.4404)
  • Suitable for liquid or gas use
  • All dimensions in inches
  • It is NOT recommended to operate this valve below 10 psi (0.7 bar)
  • Stated pressure is maximum setting.  Lower settings are available by using a range of different springs.  Please confirm when ordering
  • Leaktight when 90% of “set pressure” is applied
  • Re-seating within 7.5% of “cracking pressure” (pre-set cracking pressure is optional) state details when ordering
  • Recommended MAXIMUM back pressure 145 psi (10 bar)382666[1]

  Download PDF

Back to top


Relief Valve (H.P) RL25, RL37

bis rl25, rl37
  • Pressure equipment directive (PED) 97/23/EC approved
  • Stainless steel (316 / 1.4404)
  • Suitable for liquid use
  • All dimensions in inches
  • Leaktight when 90% of “set pressure” is applied
  • Re-seating within 20% of “cracking pressure” (pre-set cracking pressure is optional) state details when ordering
  • Recommended MAXIMUM back pressure 1,000 psi (70 bar)382666[1]

  Download PDF

Back to top


Relief Valve (H.P) RL25-G, RL37-G

rl25-g, rl37-g
  • Pressure equipment directive (PED) 97/23/EC approved
  • Stainless steel (316 / 1.4404)
  • Suitable for liquid or gas use
  • All dimension in inches
  • Leaktight when 90% of “set pressure” is applied
  • Re-seating within 20% of “cracking pressure” (pre-set cracking pressure is optional) state details when ordering
  • Recommended MAXIMUM back pressure 1,000 psi (70 bar)382666[1]

  Download PDF

Back to top


Relief Valve (H.P) RL50

bis rl50
  • Pressure equipment directive (PED) 97/23/EC approved
  • Stainless steel (316 / 1.4404)
  • Suitable for liquid use
  • All dimensions in inches
  • Leaktight when 90% of “set pressure” is applied
  • Re-seating within 20% of “cracking pressure” (pre-set cracking pressure is optional) state details when ordering
  • Recommended MAXIMUM back pressure 1,000 psi (70 bar)382666[1]

  Download PDF

Back to top


Relief Valve (H.P) RL75

bis rl75
  • Pressure equipment directive (PED) 97/23/EC approved
  • Stainless steel
  • Suitable for liquid use
  • All dimensions in inches
  • Leaktight when 90% of “set pressure” is applied
  • Re-seating within 20% of “cracking pressure” (pre-set cracking pressure is optional) state details when ordering
  • Recommended MAXIMUM back pressure 1,000 psi (70 bar)382666[1]

 

  Download PDF

Back to top


Relief Valve (H.P) RL100

rl100
  • Pressure equipment directive (PED) 97/23/EC approved
  • Stainless steel (316 / 1.4404)
  • Suitable for liquid use
  • All dimensions in inches
  • Leaktight when 90% of “set pressure” is applied
  • Re-seating within 20% of “cracking pressure” (pre-set cracking pressure is optional) state details when ordering
  • Recommended MAXIMUM back pressure 1,000 psi (70 bar)382666[1]

  Download PDF

Back to top


Direct Solenoid Valve – 2/3DS20/25

3DS20 25

 

  •  2 Position / 3 ported stainless steel (316/1.4404) valve with solenoid options
  • Suitable for liquid use
  • Fitted with “hard seats”
  • Solenoid actuation type
  • All dimensions in inches382666[1]

 

 

  Download PDF

Back to top


Direct Solenoid Valve 2/3DS25

Solenoid Valve 2-3DS25
  • 2 Position / 3 ported stainless steel (316 / 1.4404) valve with solenoid options
  • Suitable for liquid or gas use
  • Fitted with “soft seats”
  • Solenoid actuation type
  • All dimensions in inches382666[1]

  Download PDF

Back to top


Direct Solenoid Valve 2/3DS37

Direct Solenoid Valve 2-3DS37
  • 2 Position / 3 ported stainless steel (316) valve with solenoid options
  • Suitable for liquid or gas use
  • Fitted with “soft seals”382666[1]

  Download PDF

Back to top


Stop Valve M1-150

Stop Valve M1-50
  • 2 Position / 2 ported mild steel – ENP (EN1A / 220M07) valve with actuator options
  • Suitable for liquid use
  • All dimensions in inches

  Download PDF

Back to top


Stop Valve B1-12

Stop Valve B1-12
  • 2 Position / 2 ported stainless steel (316 / 1.4404) valve with air actuator (type “A4”)
  • Suitable for liquid use
  • Fitted with “hard seats”
  • All dimensions in inches

  Download PDF

Back to top