Technical & Application Information
The information presented in the PDF below is intended to assist designers in the proper selection of Parker Autoclave Engineers’ valves, fittings and tubing for fluid handling systems. This technical data does not represent product specifications but rather guidelines for direction in the proper application of the referenced equipment. These guidelines are general in nature because of the many process variables.
Medium & High-pressure Coned and Threaded Connection
Pressures to 20,000 psi (1379 bar) Uncompromised reliability under rigorous thermal and pressure cycling. Well suited to installations which require repeated assembly and disassembly with consistent reliability. Available in tube outside diameter sizes from 1/4”(6.35 mm) through 1-1/2” (38.10 mm) and bore sizes from .109”(2.77 mm) to .938” (23.83 mm).
Note: 1″ 43,000 psi (2965 bar) utilizes the medium pressure coned and threaded connection.
Pressure/Temperature Rating Guide
Information in this rating guide is furnished to approximate the pressure/temperature capabilities of Parker Autoclave Engineers valves and fittings with various options.
Material vs. Pressure Rating
Information about material vs pressure rating is included in the PDF below.
Pressure vs. Temperature Rating Curves
Technical information about material vs. pressure rating is included in the PDF below.
Technical information about flow calculations is included in the PDF below.
Liquid Flow Curves
Technical information about liquid flow curves can be found in the PDF below.
Technical information about conversion tables is included in the PDF below.